ToothFairy 2.8.5 macOS

Language: Multilingual | File size: 12 MB

Connect AirPods (or other Bluetooth headphones) to your Mac with a single click or keypress. AirPods are great, but they don’t work quite as smoothly with Macs as they do iPhones.

You can’t tell at a glance whether audio will play from the AirPods or your Mac’s built-in speaker, you have to dig into a Bluetooth submenu to connect, and then you have to go back to the menu to see when the AirPods are ready for use. ToothFairy streamlines this: just click an icon in the menu bar (or press a hotkey) to switch to the AirPods, and the icon always shows whether they’re connected.

- Works with AirPods, as well as any Bluetooth headphones, speakers, or headset that you can connect to your Mac.

- Click the hollow AirPods icon in the menu bar to switch to AirPods. It fills in to show they are connected and also displays a battery indicator.

- Supports multiple Bluetooth audio devices; you can choose a different icon and hotkey for each.

- Get the best audio quality. macOS will normally use the SCO codec if it thinks you’re going to use the microphone. ToothFairy can ensure that it uses the higher quality AAC codec when you only care about audio output: listening to music or video or playing a game.

- Disconnect a Bluetooth device by clicking the icon (or pressing the hotkey) again, so that you can switch back to your phone. AirPods and Beats devices with an Apple W1 chip do not need to be manually disconnected, and you can set them to “Connection only mode” to avoid accidental disconnetions when pressing the hotkey multiple times.

- ToothFairy automatically launches at login, so it’s always there when you need it.

- Optionally hide the Dock icon so it only appears in the menu bar. With the Dock icon hidden, you can right-click (or Control-click) the menu bar icon to access the settings.

- Run a shell script when the AirPods are connected or disconnected.

Note: ToothFairy works with devices that can be connected via the macOS Bluetooth menu. Please make sure the devices you want to connect have been paired to the system correctly before using them with ToothFairy.

Supported Operation Systems macOS 10.11 or later

将AirPods（或其他蓝牙耳机）与Mac连接只需单击或按键操作。AirPods很好用，但它们在Mac上的使用体验不像在iPhone上那么顺畅。 你可以一眼看不出音频是从AirPods发出还是从Mac内置扬声器发出的，你必须深入到蓝牙子菜单中才能连接，并且你需要回到菜单查看AirPods是否已经准备好使用。ToothFairy简化了这一切：只需点击菜单栏中的空心AirPods图标（或按下快捷键）即可切换至AirPods，该图标始终显示是否已连接。 - 支持与AirPods及任何可以连接到Mac的蓝牙耳机、扬声器或头戴式耳机。 - 点击菜单栏中空心的AirPods图标以切换至AirPods。它会填充显示它们已连接，并且还会显示电池指示器。 - 支持多种蓝牙音频设备；你可以为每个不同的设备设置一个单独的图标和快捷键。 - 获取最佳音频质量。macOS通常会在认为你将使用麦克风的情况下，正常使用SCO编码。ToothFairy可以确保当只关心音频输出时（例如听音乐、看电影或玩游戏），它会使用更高的AAC编码。 - 通过点击图标（按下快捷键）再次断开蓝牙设备连接，以便你可以切换回你的手机。带有Apple W1芯片的AirPods和Beats耳机不需要手动断开连接，并且可以设置为“仅连接模式”，以避免在多次按键时发生意外断开连接。 - ToothFairy自动在登录时启动，因此你总可以在需要它的时候找到它。 - 可选地隐藏Dock图标，使其只出现在菜单栏。通过隐藏Dock图标，你可以右键（或按住Control键）点击菜单栏图标以访问设置。 - 在AirPods连接或断开时运行一个Shell脚本。 注意：ToothFairy仅与可以通过macOS蓝牙菜单进行配对的设备兼容。在使用ToothFairy前，请确保你想要使用的设备已经正确配对到系统中。 支持的操作系统 macOS 10.11及以上版本

---

Download from free file storage

 Download from nitroflare.com  Download from rg.to

---

我要反馈

---

本站不对文件进行储存，仅提供文件链接，请自行下载，本站不对文件内容负责，请自行判断文件是否安全，如发现文件有侵权行为，请联系管理员删除。